# Arduino Pakistan

> Buy Arduino, ESP32 in Pakistan


## Pages

- [Top Sellers](https://arduinopakistan.com/top-sellers/): ₨1,500 Original price was: ₨1,500.₨1,200Current price is: ₨1,200.
- [Contact Us](https://arduinopakistan.com/contact-us/): 🛒 Welcome to ARDUINO PAKISTAN – Your Trusted Electronics Store in Pakistan!
- [Accessibility statement](https://arduinopakistan.com/accessibility-statement/): Arduino Pakistan is committed to ensuring digital accessibility for people with disabilities.
- [Refund and Returns Policy](https://arduinopakistan.com/refund_returns/): Our refund and returns policy lasts 15 days. If 15 days have passed since your purchase, we can’t offer you a full refund or exchange.
- [Home Page](https://arduinopakistan.com/): ₨2,500 Original price was: ₨2,500.₨1,300Current price is: ₨1,300.
- [Shop](https://arduinopakistan.com/shop-3/)
- [My account](https://arduinopakistan.com/my-account/)
- [Checkout](https://arduinopakistan.com/checkout/)
- [Cart](https://arduinopakistan.com/cart/): ₨1,200 Original price was: ₨1,200.₨900Current price is: ₨900.

## Products

- [40 Pins - Female to Female Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-female-to-female-30cm/)
- [40 Pins – Male to Male Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-male-to-male-30cm/)
- [10 Pins - Male to Female Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-male-to-female-ribbon-cable-10-pins/)
- [10 Pins - Female to Female Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-female-to-female-ribbon-cable-10-pins/)
- [10 Pins – Male to Male Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-male-to-male-ribbon-cable-10-pins/)
- [Soldering Iron Stand](https://arduinopakistan.com/product/soldering-iron-stand-tools-arduino-diy-project-circuit/): A soldering iron stand is a device used to hold a soldering iron when it is not in use.
- [Microphone Sound Sensor Module](https://arduinopakistan.com/product/microphone-sound-sensor-module-for-diy-arduino-kids-projects/)
- [16 Channel 12v Relay Module](https://arduinopakistan.com/product/16-channel-12v-relay-module-optocoupler-low-level-trigger-expansion-board-compatible-with-arduino-and-raspberry/)
- [8 Channel 5v Relay Module](https://arduinopakistan.com/product/8-channel-5v-relay-module-optocoupler-low-level-trigger-expansion-board-compatible-with-arduino-and-raspberry/)
- [4 Channel 5v Relay Module](https://arduinopakistan.com/product/4-channel-5v-relay-module-optocoupler-low-level-trigger-expansion-board-compatible-with-arduino-and-raspberry-pi/)
- [2 Channel 5v Relay Module](https://arduinopakistan.com/product/2-channel-5v-relay-module-optocoupler-low-level-trigger-expansion-board-compatible-with-arduino-and-raspberry-pi/)
- [1 Channel 5v Relay Module](https://arduinopakistan.com/product/1-channel-5v-relay-module-optocoupler-low-level-trigger-expansion-board-compatible-with-arduino-and-raspberry/)
- [Servo Motor MG90s](https://arduinopakistan.com/product/servo-motor-mg90s/)
- [Servo Motor SG90](https://arduinopakistan.com/product/servo-motor-sg90/)
- [16×2 Display with i2c Module](https://arduinopakistan.com/product/lcd-16x2-1602-for-arduino-and-diy-projects/)
- [DC Fan - 12v Small Fan](https://arduinopakistan.com/product/dc-fan-12v-small-fan/)
- [Crimp Connector](https://arduinopakistan.com/product/crimp-connector/)
- [Alligator Clip - Crocodile Clips](https://arduinopakistan.com/product/alligator-clip-crocodile-clips/)
- [Resistor 100 K Ohm Resistance](https://arduinopakistan.com/product/resistor-100-k-ohm-resistance/)
- [A4988 Stepper Motor Driver with Heat Sink](https://arduinopakistan.com/product/a4988-stepper-motor-driver-with-heat-sink-h-bridge-module-for-arduino-cnc-module/)
- [Arduino CNC Shield with A4988 Module for Stepper Motor](https://arduinopakistan.com/product/arduino-cnc-shield-with-a4988-module-for-stepper-motor/)
- [Arduino CNC Shield - Compatible with Arduino UNO](https://arduinopakistan.com/product/arduino-cnc-shield-a4988-v3-engraver-drive-shield-3d-printer-cnc-drive-expansion-board-for-arduino-3d-printer-cnc/)
- [433 Mhz Transmitter + Receiver Kit](https://arduinopakistan.com/product/433m-transmitter-receiver-kit-high-frequency-super-regenerative-transceiver-module-for-burglar-alarm/)
- [650nm 3V 5mW Laser Diode](https://arduinopakistan.com/product/650nm-6mm-3v-5mw-laser-dot-diode-laser-diode-for-arduino-diy-stem-projects/)
- [PIR Motion Sensor](https://arduinopakistan.com/product/pir-sensor-pir-motion-sensor-proximity-ir-sensor/)
- [Rechargeable Battery 3.7v 70mAh - Small](https://arduinopakistan.com/product/rechargeable-battery-3-7v-70mah-small/)
- [U-Type IR InfraRed Speed Sensor Module LM393 for Arduino](https://arduinopakistan.com/product/u-type-ir-infrared-speed-sensor-module-lm393-for-arduino-2/)
- [Vero Board - Small](https://arduinopakistan.com/product/vero-board-small/)
- [MB102 830 Points Solderless Breadboard](https://arduinopakistan.com/product/mb102-830-points-solderless-prototype-breadboard-high-quality/)
- [Mini Breadboard with 170 Tie Points SYB-170 Solderless Prototype](https://arduinopakistan.com/product/mini-breadboard-with-170-tie-points-syb-170-solderless-prototype-kit-pcb-bread-board-plus-adhesive-back-for-small-diy-kits-arduino-raspberry-rasp-pi-proto-project-color-may-vary/)
- [Breadboard Universal 400 Contacts - MB 102 (Half Size)](https://arduinopakistan.com/product/400-ties-mini-solderless-breadboard-universal-400-contacts-solderless-breadboard-400-points-prototyping-shield-for-electronics-testig-diy/)
- [Bread Board - GL 12 Breadboard](https://arduinopakistan.com/product/bread-board-tools-arduino-and-diy-circuit-breadboard/)
- [Ferric Chloride 100 Grams | 250 Grams | 500 Grams | 1 KG for DIY Project Circuit Board](https://arduinopakistan.com/product/ferric-chloride-1000-grams-for-diy-project-circuit-board/): WIDE APPLICATIONS: Use this ferric chloride etching solution for all sorts of other purposes such as art knives, glass casting, pottery pit firing, stone surface etching, circuit board fabrication and more!
- [9v Battery - Camelion](https://arduinopakistan.com/product/9v-battery-camelion/)
- [18650 Size Battery Pack Holder - Cell Holder](https://arduinopakistan.com/product/aa-size-battery-pack-holder-2-cell/)
- [Battery Clip for 9v Cell Connector](https://arduinopakistan.com/product/battery-clip-for-9v-cell-connector/)
- [ESP32-CAM Module WiFi - ESP32 With Camera Module](https://arduinopakistan.com/product/esp32-cam-module-wifi-bluetooth-compatible-camera-module-development-board-esp32-with-camera-module/)
- [Variable Resistor for Project Circuit Mount](https://arduinopakistan.com/product/variable-resistor-for-project-circuit-mount/)
- [L 298 H Bridge Module - Motor Driver](https://arduinopakistan.com/product/l-298-h-bridge-module-l298-motor-driver-motor-driver-stepper-dc-servo/)
- [Keypad 4x4 Arduino DIY Circuit](https://arduinopakistan.com/product/keypad-4x4-arduino-diy-circuit/)
- [ESP - 8266 Wifi Module Arduino Circuit ESP8266](https://arduinopakistan.com/product/esp-8266-wifi-module-arduino-circuit-esp8266/)
- [Flame Sensor - KY026 Sensor](https://arduinopakistan.com/product/flame-sensor-ky026-sensor-arduino-diy-circuit/)
- [HC-SR04 Ultrasonic Module](https://arduinopakistan.com/product/hc-sr04-ultrasonic-module-distance-sensor-fit-for-arduino-uno-mega-nano-robot-xbee-zigbee/)
- [Water Level Indicator](https://arduinopakistan.com/product/water-level-indicator-sensor-arduino-diy/)
- [DC 3v Active Buzzer](https://arduinopakistan.com/product/dc-3v-active-buzzer-2-terminals-for-arduino-raspberry-pimagnetic-electronic-continous-long-beep-tone-alarm-sounder-pack-of-2/)
- [Helping Hands Magnifying Glass Soldering Station](https://arduinopakistan.com/product/helping-hands-magnifying-glass-soldering-station-led-lighted-3-5x-12x-magnifier-with-auxiliary-clips-alligator-clamp-for-miniatures-projectsmodel-making-soldering/): LED Lighted 3.5X 12X Magnifier with Auxiliary Clips Alligator Clamp for Miniatures Projects,Model Making, Soldering
- [Soldering Iron - 40W](https://arduinopakistan.com/product/soldering-iron-40w/)
- [Arduino Nano USB Cable](https://arduinopakistan.com/product/arduino-nano-usb-cable/)
- [5V Mini Water Pump](https://arduinopakistan.com/product/micro-submersible-mini-water-pump-dc-3-5v-for-aquariums-fish-tanks-fountains-hydroponics-and-gardens/)
- [Yellow Motor with Wheel](https://arduinopakistan.com/product/motor-wheel-diy-robotics-arduino/)
- [Energizer AAAA Battery in Pakistan | AAAA Cell Alkaline | 2 Count](https://arduinopakistan.com/product/energizer-aaaa-batteries-1-5-volt-battery-aaaa-alkaline-2-count/): Energizer Cell AAAA AAAA Cell AAAA Battery AAAA Battery Cell AAAA Cell for Stylus AAAA Batteries AAAA Cell Non-Rechargeable AAAA Battery for Stylus
- [Fujika Kerosene Oil Heater - KSP 231 - Red](https://arduinopakistan.com/product/fujika-kerosene-oil-heater-ksp-231-red/)
- [5v DC Motor](https://arduinopakistan.com/product/pack-of-2-5v-dc-motor-for-arduino-and-projects-low-voltage-dc-motor/)
- [Abdullah Dough Maker Kneading Machine - آٹا گوندنے والی مشین](https://arduinopakistan.com/product/abdullah-dough-maker-kneading-machine-%d8%a2%d9%b9%d8%a7-%da%af%d9%88%d9%86%d8%af%d9%86%db%92-%d9%88%d8%a7%d9%84%db%8c-%d9%85%d8%b4%db%8c%d9%86/)
- [LM2596s DC-DC Buck Converter LM 2596](https://arduinopakistan.com/product/lm2596s-dc-dc-buck-converter-for-arduino-lm-2596-adjustable-dc-step-down-power-supply-module/)
- [1 x Energizer AAAA - Replacement for: E96, LR8D425, MN2500, MX2500](https://arduinopakistan.com/product/1-x-energizer-aaaa-replacement-for-e96-lr8d425-mn2500-mx2500/): Energizer Cell AAAA AAAA Cell AAAA Battery AAAA Battery Cell AAAA Cell for Stylus AAAA Batteries AAAA Cell Non-Rechargeable AAAA Battery for Stylus
- [WeMos D1 R1 Mini - ESP8266 Development Kit](https://arduinopakistan.com/product/wemos-d1-r1-mini-esp8266-development-kit/): Based on ESP-8266EX. Arduino compatible, using Arduino IDE to program. Support OTA wireless upload. On-Chip 5V 1A Switching Power Supply (highest input voltage 24V). The direct use of Arduino IDE development, the same operation with Arduino UNO. Operating Voltage: 3.3V Digital I/O Slot: 11 Analog Input Slot: 1
- [18650 Rechargeable Battery 3.7v](https://arduinopakistan.com/product/18650-rechargeable-battery-3-7v/): Batteries Size - 67*18*18mm/2.64*0.7*0.7inch; it's a Rechargeable Battery BUTTON TOP, please check carefully before purchasing !!!). Versatile Compatibility: Designed to be compatible with a wide range of devices, our 3.7V 18650 battery is perfect for flashlights, power banks, and other gadgets. Say goodbye to disposable batteries with our rechargeable 18650 battery, offering cost-saving and eco-friendly power solutions. High Capacity: Our 18650 rechargeable battery boasts a generous capacity, ensuring long-lasting power for your devices. Durability: Crafted with quality materials, our 18650 battery offers durability and resilience, providing a dependable power source for your electronic Enhanced Performance: With a stable 3.7V output, our 18650 battery delivers consistent and reliable performance, ideal for high-drain applications
- [AA Size Battery Pack Holder - Cell Holder](https://arduinopakistan.com/product/aa-size-battery-pack-holder-cell-holder/)
- [Soldering Iron - 60W](https://arduinopakistan.com/product/soldering-iron-60w/)
- [OLED 1.3" - O LED 1.3 Inch](https://arduinopakistan.com/product/oled-1-3-o-led-1-3-inch/): HD44780 1602 LCD Display Module DC 5V Blue Blacklight 1602 LCD Display Module Can display 2-lines X 16-characters Commonly-used HD44780 controller is built in this 1602 LCD module Viewing area size: 64.5mm x 16mm
- [OLED 0.9" - O LED 0.9 Inch](https://arduinopakistan.com/product/oled-0-9-o-led-0-9-inch/): HD44780 1602 LCD Display Module DC 5V Blue Blacklight 1602 LCD Display Module Can display 2-lines X 16-characters Commonly-used HD44780 controller is built in this 1602 LCD module Viewing area size: 64.5mm x 16mm
- [Arduino UNO in Pakistan](https://arduinopakistan.com/product/arduino-uno-in-lahore/): Arduino UNO Arduino Arduino UNO kit Arduino Kit Arduino kit complete Starter Kit Arduino UNO R3 Arduino Starter Kit Arduino Uno kit Complete Kit Arduino Uno Starter Kit Arduino Uno Kit Box Arduino UNO r3 with Cable Arduino UNO Cable Arduino Uno kit Complete Arduino UNO Board
- [5mm Yellow LED Light Bulb](https://arduinopakistan.com/product/5mm-yellow-led-light-bulb/)
- [5mm Blue LED Light Bulb](https://arduinopakistan.com/product/5mm-blue-led-light-bulb/)
- [5mm Green LED Light Bulb](https://arduinopakistan.com/product/5mm-green-led-light-bulb/)
- [Arduino UNO Starter Kit with Ultrasonic Sensor](https://arduinopakistan.com/product/arduino-uno-starter-kit-with-ultrasonic-sensor/)
- [Arduino UNO Starter Kit](https://arduinopakistan.com/product/arduino-uno-starter-kit/): Arduino UNO Arduino Arduino UNO kit Arduino Kit Arduino kit complete Starter Kit Arduino UNO R3 Arduino Starter Kit Arduino Uno kit Complete Kit Arduino Uno Starter Kit Arduino Uno Kit Box Arduino UNO r3 with Cable Arduino UNO Cable Arduino Uno kit Complete Arduino UNO Board
- [LM2596s DC-DC Buck Converter with Display](https://arduinopakistan.com/product/lm2596s-dc-dc-buck-converter-with-display/)
- [Arduino UNO in Pakistan with USB Cable](https://arduinopakistan.com/product/arduino-uno-in-pakistan/): 【UNO R3 Board Improved version】 Modified the Compatible with Arduino UNO REV3 version, replaced 16u2, used CH340G driver, ensured complete consistency and compatibility with the original version, greatly reduced costs.
- [ESP32 Dev Board ESP 32 Microcontroller](https://arduinopakistan.com/product/esp32-dev-board-esp-32-microcontroller/)
- [MQ-7 Carbon Monoxide Sensor](https://arduinopakistan.com/product/mq-7-carbon-monoxide-sensor/): Product Name: Gas Sensor Module; Model: MQ-7; Type: Analog Detecting Type : Carbonic Oxide(Co); Rated Voltage: DC 5V; Rated Current: 180mA Detecting Range: 100-1000ppm; Pin Quantity: 4; Pin Spacing: 1.8mm/ 0.07″ Pin Definition: AO-analog Output, DO-Digital Output, GND- Ground, VCC-Voltage To Current Converter ; Total Size: 35 x 20 x 21mm/ 1.4″ x 0.79″ x 0.83″ (L*W*H)
- [Infrared IR LED Pulse Detect Sensor Module - Heart Rate Detector - KY-039](https://arduinopakistan.com/product/infrared-ir-led-pulse-detect-sensor-module-heart-rate-detect-measuring-module-measure-finger-tl-module-ky-039/): Operating Voltage: 5V Using ultra-bright infrared (IR) LED and a photosensitive transistor to detect the pulse of the finger, a red LED will flash with the pulse Working principle: As LED and photosensitive transistor are located on two sides of the finger, the photosensitive transistor is used to obtain light flux. When blood pressure pulsation passes through the finger, the resistance of the photosensitive transistor will change slightly Number of sensor pins: 3Pins; Color: Black Package Contents: Finger Pulse Detect Sensor Module
- [Pulse Sensor Heart Rate Sensor Monitor](https://arduinopakistan.com/product/pulse-sensor-heart-rate-sensor-monitor-pulse-sensor-compatible-with-arduino-module-raspberry-pi/): Package Included: Heart Rate Pulse Sensor Sensor Module Compatible with Arduino Raspberry pi The power supply voltage: 3.3V ~ 5 v Diameter: 16mm,Magnification: 330,LED Wavelength: 609nm Pulse sensor Ar-duino is used to test the heart rate sensor, students, artists,athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate. The sensor clips onto a fingertip or earlobe and plugs right into Ar-duino with some jumper cables.
- [DHT22 Temperature and Humidity Sensor Module](https://arduinopakistan.com/product/dht22-am2302-digital-temperature-and-humidity-sensor-module-temperature-humidity-monitor-sensor-replace-sht11-sht15-for-arduino-electronic-practice-diy/): Material Plastic Style Modern Measurement Accuracy ±0.5℃, ±2%RH Measuring Range Temperature: -40 - 80 °C, Humidity: 0 - 100%RH About this item Main Chip: AOSONG AM2302 High Sensitive Temperature Humidity Sensor Single-bus digital signal output, bidirectional serial data With fixing screw hole, convenient to install and fixed Temperature range: -40 to 80 degree celsius, Temperature measurement accuracy: +/- 0.5℃ degree celsius Humidity measuring range: 0~100%RH, Humidity measurement accuracy: ±2%RH
- [5mm LEDs Infrared Emitter and Receiver Diode](https://arduinopakistan.com/product/5mm-940nm-leds-infrared-emitter-and-ir-receiver-diode-5mm-infrared-emissionreceiver-tube-2/): 1x Pair 5MM Infrared Emission Receiver Tube wavelength:940nm Diameter : 5MM IR EMITTER IR RECEIVER
- [Resistor 10 K Ohm Resistance](https://arduinopakistan.com/product/resistor-10-k-ohm-resistance/): Product:10 k Ohm - 1/4W Features: Power 0.25 W Resistance 10 k ohm Vero Board Mount Bread Board Mount Resistor
- [BC548 Transistor IC](https://arduinopakistan.com/product/bc548-transistor-ic/): Product:BC548 Integrated Circuit Features: NPN Transistor High Voltage 65v Low Noise Integrated Circuit
- [2n2222 Transistor IC](https://arduinopakistan.com/product/2n2222-transistor-ic/): Product:2n2222 Integrated Circuit Features: NPN Transistor Bipolar Junction Transistor General Purpose Low Power switching medium current 800mA medium voltage 40v Integrated Circuit
- [Ferric Chloride 1000 Grams](https://arduinopakistan.com/product/ferric-chloride-1000-grams-for-diy-project-circuit-board-2/): Premium Grade Copper Etchant Powder - The Best in its class PROPRIETARY SOLUTION - designed for etching printed circuit boards and other metals INDUSTRY PREFERRED - Used for etching copper, brass, bronze, Damascus steel, stainless steel, circuit board fabrication, Jewelry making, Metalsmithing, Decorate art knives and other metalwork, Steel sign acid etching, Etching pattern welds, Etching on stone surfaces, Used as a colorant in pit-firing some pottery, Glass casting METAL ETCHING: Ferric Chloride etchant is perfect for projects circuit boards WIDE APPLICATIONS: Use this ferric chloride etching solution for all sorts of other purposes such as art knives, glass casting, pottery pit firing, stone surface etching, circuit board fabrication and more!
- [Ferric Chloride 500 Grams](https://arduinopakistan.com/product/ferric-chloride-500-grams-for-diy-project-circuit-board/): Premium Grade Copper Ethchant Powder - The Best in its class PROPRIETARY SOLUTION - designed for etching printed circuit boards and other metals INDUSTRY PREFERRED - Used for etching copper, brass, bronze, Damascus steel, stainless steel, circuit board fabrication, Jewelry making, Metalsmithing, Decorate art knives and other metalwork, Steel sign acid etching, Etching pattern welds, Etching on stone surfaces, Used as a colorant in pit-firing some pottery, Glass casting METAL ETCHING: Ferric Chloride etchant is perfect for projects circuit boards WIDE APPLICATIONS: Use this ferric chloride etching solution for all sorts of other purposes such as art knives, glass casting, pottery pit firing, stone surface etching, circuit board fabrication and more!
- [16x2 Display LCD 1602](https://arduinopakistan.com/product/1602-lcd-display-module-dc-5v-16x2-character-lcm-blue-blacklight-new/): HD44780 1602 LCD Display Module DC 5V Blue Blacklight 1602 LCD Display Module Can display 2-lines X 16-characters Commonly-used HD44780 controller is built in this 1602 LCD module Viewing area size: 64.5mm x 16mm
- [Dual Axis Joystick](https://arduinopakistan.com/product/dual-axis-button-joystickgame-joystick-control-stick-sensor-joystick-electronic-building-blocks-compatible-with-arduino-compatible-with-ps2/): [Game Joystick Compatibility] - Utilizes Game joystick potentiometers for (X,Y) dual-axis analog output and (Z) single-button digital output, enabling interactive creations like remote controllers when paired with sensor expansion boards. [Convenient Interface Design] - Specifically designed with separate circuits for X, Y, and Z axes for easy integration with sensor expansion boards via a dedicated 3-pin connector, ensuring convenient usage. [Input Voltage Range and Outputs] - Supports DC input voltage ranging from 3.3V to 5V. Outputs analog values corresponding to (X,Y) axes and digital signals indicating button presses on the Z-axis, perfect for creative remote-controlled interactive projects. [Precise Analog Control] - Features a 10K resistor for accurate dual-axis control, providing varying resistance levels based on joystick direction. Outputs analog voltages between 0V to 5V for different directions, ensuring precise control. [Creative Programming Possibilities] - Programmable via controllers and sensor expansion boards, facilitating the creation of innovative remote-controlled interactive projects with creative functionalities.
- [UNO CNC Shield with A4988 Module for Stepper Motor](https://arduinopakistan.com/product/arduino-cnc-shield-with-a4988-module-for-stepper-motor-2/): Product: Arduino CNC Sheild with H Bridge Features: 1 x Module, 3 x H-Bridge
- [2 Wheel Drive Robot Base Chasis Kit](https://arduinopakistan.com/product/robot-base-chasis-kit-for-diy-student-projects/): Product:Robot Base - Robot Chasis KIT Features: Voltage: DC 6V Current: 120MA Reduction rate: 48:1 RPM (With tire): 240 Tire Diameter: 66mm Car Speed(M/minute): 48 Motor Weight (g): 50 Motor Size: 70mm*22mm*18mm Noise:
- [Plastic Casing for Arduino UNO R3](https://arduinopakistan.com/product/plastic-casing-for-arduino-uno-r3-2/): Product:UNO Casing Features: The Arduino Uno is the undisputed champion of all development boards, why would you not want to keep your board safe and sound inside this clear plastic enclosure? These cases protect your Arduino Uno from things like rogue wires that might short it out while still allowing full access to the board! Simply snap the Uno into the bottom half of the enclosure, then snap the two sides together. As you may have noticed, these enclosures are actuallytransparent. The enclosures are perfect for letting you see your Arduino Uno and make any needed adjustments easily. The enclosure provides slots to access each header, USB port, power jack, the reset button, the AREF and ICSP connectors, as well as feet and vents to ensure the board gets proper cooling and slide-in wall mounting slots. All of the status LEDs on the Uno are visible through the case thanks to light pipes embedded in the design.This is a really durable case that will do a great job protecting your Arduino Uno! Arduino Uno
- [Resistor 10 K Ohm Resistance](https://arduinopakistan.com/product/pack-of-50-resistor-10-k-ohm-resistance-1-4w-2/): Product:Resistor 10 K Ohm - 1/4W Features: Resistance 10 kOhm Power 0.25W Circuit Design Bread Board Mount Vero Board Mount Resistor
- [Fujika Kerosene Oil Stove Wick - High Quality Glass Fiber + 100% Cotton Heaters Wick](https://arduinopakistan.com/product/fujika-kerosene-oil-stove-wick-high-quality-glass-fiber-100-cotton-heaters-wick/): High quality cotton Graphite coated fiberglass Several sets of lines Movable kerosene heater Packing Fuel Consumption:0.24-0.28L/Hr Heater Output: 7800-8900BTU/Hr Continues Heating Duration:17-18hr Tank System:Triple Ignition Type: Match
- [IR Infrared Sensor Module](https://arduinopakistan.com/product/ir-infrared-obstacle-avoidance-sensor-module-for-arduino-smart-car-robot-3-wire-reflective-photoelectric-for-arduino-smart-car-robot/): Board size : 3.1CM * 1.5CM Can be used for 3-5V DC power supply modules . When the power is turned on, the red power The output port OUT sensor module can be directly connected to the micro-controllerIO port You can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IOusing the comparator LM393, stable
- [BFD-1000 - 5 Way Line Tracking Following Sensor](https://arduinopakistan.com/product/bfd-1000-5-way-line-tracking-and-line-following-ir-infrared-sensor-module/): The input voltage: 3.0 to 5.5 V Tracking distance: 0 to 3 cm (black and white line sensor) Barrier distance: 0-6 cm (adjustable distance detection) The output format: high and low level signal
- [1W RGB LED MODULE](https://arduinopakistan.com/product/pack-of-2-1w-rgb-led-module/): Arduino 3-color LED Module With red, green and blue output Great for DIY project Dimensions: 0.98 in x 0.59 in x 0.08 in (2.5 cm x 1.5 cm x 0.2 cm)
- [Digital TTP223B Touch Sensor Module - Blue](https://arduinopakistan.com/product/digital-ttp223b-touch-sensor-module-blue/): The module is based on a touch-sensing IC (TTP223B) capacitive touch switch module. In the normal state, the module output low, low power consumption; When a finger touches the corresponding position, the module output high, if not touched for 12 seconds, switch to low-power mode.
- [WeMos D1 R1 WiFi - ESP8266 Kit](https://arduinopakistan.com/product/wemos-d1-r1-wifi-uno-based-esp8266-node-mcu-development-kit/): Based on ESP-8266EX. Arduino compatible, using Arduino IDE to program. Support OTA wireless upload. On-Chip 5V 1A Switching Power Supply (highest input voltage 24V). The direct use of Arduino IDE development, the same operation with Arduino UNO. Operating Voltage: 3.3V Digital I/O Slot: 11 Analog Input Slot: 1
- [Soldering Wire - Small Roll](https://arduinopakistan.com/product/jumbo-pack-3v-dc-motor-and-lipo-battery-70mah-for-arduino-and-projects/)
- [i2c Module for 16x2 LCD](https://arduinopakistan.com/product/iic-i2c-lcd-module-for-16x2-and-16x4-lcd-for-diy-projects-arduino-and-microcontrollers/): This LCD2004 is a great I2C interface for 2×16 and 4×20 LCD displays. With the limited pin resources, your project may be out of resources using normal LCD shield. With this I2C interface LCD module, you only need 2 lines (I2C) to display the information. If you already have I2C devices in your project, this IIC I2C LCD Module For 16×2 And 16×4 LCD actually cost no more resources at all. Fantastic for Arduino based projects. Easy to use. Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Support IIC protocol. The I2C LCD1602 library is provided, so you can call it directly. With a potentiometer used to adjust backlight and contrast. Power supply: +5V; Address of the module: ox27
- [TP 4056 Charger Module - C Type USB](https://arduinopakistan.com/product/tp-4056-3-7v-li-ion-charger-module-1a-with-battery-protection-tp4056/): TP4056 1A Lipo Battery Charging Board Micro USB with Current Protection is a tiny module is perfect for charging single cell 3.7V 1 Ah or higher LiPo cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protection IC this module will offer 1A charge current then cut off when finished. Furthermore when the battery voltage drops below 2.4V the protection IC will switch the load off to protect the cell from running at too low of a voltage – and also protects against over-voltage and reverse polarity connection (it will usually destroy itself instead of the battery) however please check you have it connected correctly the first time. Using the module: Connect micro USB cable for power, or 5V DC to pads marked IN+ and IN- on the left-hand side of the module Connect cell to charge to B+/B- pads on the right-hand side of the module A load (something for the battery to power) can be connected to the OUT+/OUT- pads on the right-hand side Important! Disconnect load when charging The red LED indicates charging in progress, green LED indicates charging has finished. Never charge your battery at a rate greater than 1C. NOTE: 1. Ampere meter can only be connected to a 5v input end of the module. 2. It is better than the charging current is 37% of the battery capacity. If you charge the battery of 1000mAh, a current of 400mAh is enough. 3. The connection wire should not be too thick. 4. Make sure the connect point is good. 5. If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-subtract the charging current to avoid burn damage to the chip. 6. NO Reverse polarity. Specifications and Features : Dimension: 25 x 19 x 10 (LxWxH)mm. Charge module: Linear charging. Current: 1A adjustable. Charge precision: 1.5%. Input voltage: 4.5V-5.5V. Full charge voltage: 4.2V. Led indicator: red is charging Green is fully charged. Input interface: micro USB. Work temperature: 10° to +85°. Inversed polarity: NO.
- [ADXL345 Digital 3-axis Acceleration, Gravity, Tilt sensor module](https://arduinopakistan.com/product/adxl345-digital-3-axis-acceleration-gravity-tilt-sensor-module-for-arduino/): Voltage – Supply : 3.3 V/ 5V. Interface :I²C, SPI. Sensing Range :±2g, 4g, 8g, 16g. Sensitivity: X : 28.6 LSB/g. Y : 31.2 LSB/g. Z : 34.5 LSB/g. Sensor Type :Accelerometer 3 Axis. Dimensions : 28 mm x 14 mm. Weight : 10 gm. Ultra Low Power: 40µA in measurement mode, 0.1µA in standby@ 2.5V. Free-Fall Detection. Tap/Double Tap Detection. Flexible interrupt modes mappable to either interrupt pin Measurement ranges selectable via serial command Bandwidth selectable via serial command Wide temperature range (−40°C to +85°C). 10,000 g shock survival. Support 5V/3.3V voltage input, on-board RT9161 power chip, lower pressure drop faster than the 1117, faster load speed of response, very suitable for high-noise power supply environment. User-selectable resolution Fixed 10-bit resolution. Full resolution, where resolution increases withrange, up to 13-bit resolution at ±16(maintaining 4 mg/LSB scale factor in allranges). Applications : Pointing devices. Handsets. Medical instrumentation. Gaming. Industrial instrumentation. Personal navigation devices. Hard disk drive (HDD) protection. Fitness equipment. defense and aerospace.
- [Zip Tie Wire Tie Cable Tie - CV 100 - 4 inches](https://arduinopakistan.com/product/zip-tie-wire-tie-cable-tie-cv-100-4-inches/): Product:Cable Tie - CV 100 Features: Nylon 100 mm x 2.5 mm x 22 mm 17.63 lb Cable Tie
- [9v Cell - Battery Clip to DC Pin](https://arduinopakistan.com/product/9v-cell-battery-clip-to-dc-pin/): Product: 9v Battery Clip Features: High Quality material, durable and reliable to use Excellent material, fine workmanship 9V battery buckle I-shaped design, with red and black connecting lines The length of line is long enough for using Battery Clamp for 9v Battery
- [SONY AAA size Rechargeable Battery - 1.2v 4300 mAh Cell (Pack of 2)](https://arduinopakistan.com/product/sony-cycleenergy-aaa-size-rechargeable-battery-1-2v-4300-mah-cell-pack-of-2/): Type: Re-Chargeable Battery Cell Size: AAA Voltage: 1.2V Capacity: 4300mAh Cycles: 1000 Charge/Discharge Cycles Brand: Sony Cycle Energy Chemistry: Nickel Metal Hydride (Ni-MH) Quality: A++ AAA RECHARGEABLE ENERGY SET OF 2 PCS
- [0.8mm Mini Soldering Wire Reel](https://arduinopakistan.com/product/0-8mm-tin-lead-rosin-core-solder-welding-iron-wire-reel/): Description: - 100% Brand new - 1 roll of 0.8mm cored solder wire - Diameter: 0.8mm - Weight: 11g - Length: Approx. 170cm - Sn spec: 60% - Flux: 2.0% Package Include： 1pc x 0.8mm solder wire
- [Ferric Chloride 250 Grams for DIY Project Circuit Board](https://arduinopakistan.com/product/ferric-chloride-250-grams-for-diy-project-circuit-board/): Ferric Chloride 250 Grams for DIY Project Circuit Board Premium Grade Copper Etchant PROPRIETARY SOLUTION - designed for etching printed circuit boards and other metals INDUSTRY PREFERRED - Used for etching copper, brass, bronze, Damascus steel, stainless steel, circuit board fabrication, Jewelry making, Metalsmithing, Decorate art knives and other metalwork, Steel sign acid etching, Etching pattern welds, Etching on stone surfaces, Used as a colorant in pit-firing some pottery, Glass casting METAL ETCHING: Ferric Chloride etchant is perfect for projects circuit boards WIDE APPLICATIONS: Use this ferric chloride etching solution for all sorts of other purposes such as art knives, glass casting, pottery pit firing, stone surface etching, circuit board fabrication and more!
- [Yellow Robot Motor 3-6v DC](https://arduinopakistan.com/product/yellow-robot-motor-3-6v-dc/): Product:Robot Motor Features: Voltage: DC 6V Current: 120MA Reduction rate: 48:1 RPM (With tire): 240 Tire Diameter: 66mm Car Speed(M/minute): 48 Motor Weight (g): 50 Motor Size: 70mm*22mm*18mm Noise:
- [Arduino Nano with Cable](https://arduinopakistan.com/product/arduino-nano-with-cable/): Product:Arduino Nano Features: Microcontroller ATmega328 Architecture AVR Operating Voltage 5 V Clock Speed 16 MHz Analog I/O Pins 8 DC Current per I/O Pins 40 mA (I/O Pins) Input Voltage 7-12 V Digital I/O Pins 22 PWM Output 6 Power Consumption 19 mA
- [4 Wheel Drive Robot Base Car Chassis KIT](https://arduinopakistan.com/product/4wd-4-wheel-drive-robot-base-car-chassis-kit-for-diy-student-projects/): Product:Robot Base - Robot Chasis KIT Features: Voltage: DC 6V Current: 120MA Reduction rate: 48:1 RPM (With tire): 240 Tire Diameter: 66mm Car Speed(M/minute): 48 Motor Weight (g): 50 Motor Size: 70mm*22mm*18mm Noise:
- [Arduino CNC Sheild with Arduino Uno A4988 Module](https://arduinopakistan.com/product/arduino-cnc-sheild-with-arduino-uno-a4988-module/): Product: Arduino CNC Sheild with Arduino Uno A4988 Module Features: 1 x UNO, 1 x Module 4 x H-Bridge
- [5v DC Motor and Lipo Battery 3.7v](https://arduinopakistan.com/product/combo-pack-5v-dc-motor-and-lipo-battery-3-7v-70mah-for-arduino-and-projects/): Weight: 3.7g Rated voltage: 5V Rated current: 0.02A Stall current: 0.3A Product:Rechargeable Battery 3.7v 70mAh Features: High Quality Durable Rechargeable 3.7v Battery
- [Collar Mic / Microphone](https://arduinopakistan.com/product/collar-mic-microphone/): A 3.5mm Mic with secure Active Clip Windscreen Protector to help reduce wind noise Defense against distorting 'P' and 'B' consonants Protects your microphone from surplus spit caused by over eager performers 360°Flexible gooseneck holder, convenient for use
- [Plastic Fan Propeller](https://arduinopakistan.com/product/plastic-fan-propeller-for-small-motor-diy-projects/): Compact Design Useful for School Science Projects Strong Air Flow Fits On Small 3/6v Motors Educational Useful
- [Propeller with DC Motor](https://arduinopakistan.com/product/propeller-for-small-motor-diy-plastic-fan-with-3v-6v-dc-small-motor/): Voltage: 3V to 6V Compact Design Used in Toys , RC Car Project Useful for School Science Projects Strong Air Flow Fits On Small 3/6v Motors Educational Useful
- [Circuit Board - 6x4 Inch Copper Sheet One Sided](https://arduinopakistan.com/product/circuit-board-6x4-inch-copper-sheet-one-sided-clad-plate-laminate-board-for-diy/): Panel Size: 6 Inch x 4 Inch Thickness: 1.5mm Layers: Single Side Operating Temperature: Up to 140 °C or 285°F Material:bakelite This product might have few fingerprints, you can clean by super-fine steel-wool, Restore4 , Tarn-X, Scotchbrite, Zap! or similar before using. Features: After that be sure to rinse and dry so without any water spots.
- [Helicopter Coreless Micro DC Motor With Propeller](https://arduinopakistan.com/product/helicopter-coreless-micro-dc-motor-with-propeller/): This is DIY Helicopter Coreless DC Motor With Propeller to make small size Drones.This Micro Dc Motor is 3.7V operated and 0.4W. Efficiency:IE 1 Continuous Current(A):0.1A Usage:Boat,Car,Electric Bicycle,Fan,Helicopter Output Power:0.4W Protect Feature:Totally Enclosed Type:Micro Motor Construction:Permanent Magnet Speed(RPM):55000RPM Commutation:Brushless Voltage(V):DC3.7-4.2V Model Number:716 Size: 7 x 16 MM
- [KY-022 Infrared Receiver Sensor Module 38khz](https://arduinopakistan.com/product/ky-022-arduino-infrared-sensor-infrared-receiver-module-38khz-receiver/): Infrared IR Sensor Receiver Module for Arduino adopts 1838 infrared receiving head. Light resistance, strong electromagnetic interference, built-in infrared dedicated IC, can work under 500 lux light intensity.Widely used in stereo, TV, video machine, disc machine, set-top boxes, digital photo frame; car stereo, remote control toys, satellite receivers, hard disk player, air conditioner, heater; electric fan, lighting and other home appliances. Dimension: 6.4 x 7.4 x 5.1mm Receiving angle: 90 ? Working voltage: 2.7 ~ 5.5V Frequency: 37.9KHz Receiving range: 18m
- [Rotary Encoder Module KY-040](https://arduinopakistan.com/product/rotary-encoder-module-ky-040-360-degrees-for-arduino-compatible-brick-sensor-switch-development-board/): Model : KY-040. Type : Incremental Encoder. Cycles per revolution (CPR) : 20. Working voltage : 0 – 5V. Material : Brass. Weight : 10 gm. Size : 32 x 19 x 30 mm.
- [TTP223 Digital Capacitive Touch Sensor](https://arduinopakistan.com/product/ttp223-digital-capacitive-touch-sensor-self-calibration-self-lock-button-switch-module-2-55-5v/): Operating voltage 2.0V~5.5V Operating current @VDD=3V, no load, SLRFTB=1 The response time max about 60mS at fast mode, 220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance(0~50pF) outside Have two kinds of sampling length by pad option(SLRFTB pin) Stable touching detection of human body for replacing traditional direct switch key Provides Fast mode and Low Power mode selection by pad option(LPMB pin) Provides direct mode、toggle mode by pad option(TOG pin) Open drain mode by bonding option, OPDO pin is open drain output, Q pin is CMOS output All output modes can be selected active high or active low by pad option(AHLB pin) Have the maximum on time 100sec by pad option(MOTB pin) Have external power on reset pin(RST pin) After power-on have about 0.5sec stable-time, during the time do not touch the key pad, And the function is disabled Auto calibration for life Re-calibration period is about 4.0sec, when key has not be touched
- [TP4056 Charging Module - Micro USB](https://arduinopakistan.com/product/pack-of-2-tp4056-charging-module-5v-micro-usb-1a-18650-lithium-charging-board-with-protection-charger-module-with-dual-protection-function/): ★MULTIPLE PROTECTION: Micro USB lithium ion / lipo / 18650 charging board with overcharge, overdischarge and overcurrent protection, other features include current monitor, under voltage lockout, automatic recharge.
- [12V 1A adapter](https://arduinopakistan.com/product/12v-1a-adapter-incubator-adapter-charger-adapter-with-protection-ac100v-240v-voltage-input-with-long-copper-wire/): Input: 220-240 V AC, 50/60Hz Output Voltage:12 V DC, 1-2A Max Wattage:24W Power cord length:3.9ft/1.2m Dimensions:3.86inch/98mm x 1.77inch/45mm x 2.36inch/60mm Diameter of connector:interior 2.1mm ; exterior: 5.5mm This item is power adapter (transformer)for low voltage 3528/5050 LED strip lights. Package include:1 X 12V DC Power Adapter
- [W1209 12V DC Digital Temperature Controller](https://arduinopakistan.com/product/w1209-12v-dc-digital-temperature-controller-board-micro-thermostat-50-110c-electronic-module-switch-with-10a-one-channel-relay-and-waterproof-compatible-with-ar-duino-rasp-berry-pi/): 100% complete machine patch, wave soldering, stable performance, good consistency. Embedded CPU chip (MCU), more intelligent, lower power consumption. Automatic power set memory (MCU built-in EEPROM memory unit). Control accuracy of 0.1 degrees Celsius. Have been tested for stability, consistency and reliability. Tips: - long press set to get menu, starts at P0 - press +/- to get next P-parameter - press set to choose that parameter - press +/- to select the value you want for that parameter - press set to accept it - long press +/- = reset to default - power-out does reset to default - default temp set is 34.5C
- [5V 2A Power Adapter](https://arduinopakistan.com/product/5v-2a-power-adapter-dc-5v-power-cord-universal-power-adapter-for-led-power-supply-cctv-camera-bt-speaker-gps-webcam-router-2000ma-max/): 【NOTE】Our 5v power supply cannot charge your installations and cannot be used as a charger. It is only used to provide power function for normal products, please confirm this before purchasing. 【HIGH QUALITY】Featuring overvoltage, overcurrent, short circuit, overload, and surge safeguards, our power adapter is certified by CE, FCC, and DoE VI for exceptional quality. Operating noiselessly without fans, each unit is rigorously tested before shipment to minimize defects. Should any issues arise post-delivery, our 24-hour response time ensures swift resolution. Thank you for choosing us; we're dedicated to exceeding your expectations. 【Product Specifications】This dc 5v charger input range of AC100V-240V at 50/60Hz. It outputs DC5V~2A, maxing at 10W. The DC plug measures 5.5mm x 2.1mm, and it's lightweight at around 80g. 【Cable Length】ac adapter power cord 150 cm / 5 feet, alleviating concerns of cord length limitations. Polarity: Center positive (+). IMPORTANT: Verify that your device operates within or below a 5V 2A output range. 【Extensive Compatibility】the ac adapter is bundled with 8 versatile interchangeable tips, ensuring compatibility with a wide array of AC/DC home appliances, encompassing a spectrum from 1V to 5V. This encompasses various devices such as household electronics, tablet PCs, scales, routers, speakers, LED strip lights, CCTV camera systems, USB charging cameras, and beyond, effectively addressing the needs of approximately 95% of such devices. 【Safety and durability】this 5v dc power supply have robust enclosure provides effective defense against scratches, impacts, and drops, exhibiting the capability to withstand pressure and ensuring the integrity of internal components even in emergency scenarios, thereby promoting extended operational durability.
- [LDR Photosensitive Sensor Module](https://arduinopakistan.com/product/5mm-ldr-photosensitive-sensor-module-light-dependent-resistor-sensor-module-digital-light-detection-lm393-3-pins-for-arduino/): photosensitive resistance module's most sensitive to ambient light, commonly used to detect environment around the brightness of the light, or MCU trigger relay module, etc.; module in the environment light intensity than set threshold, output high level DO end, when the environment light intensity more than set threshold, the DO output low level; the DO output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect the environment light intensity change; the DO output can be directly driven our relay module, which can form a light-operated switch.
- [LM393 Soil Moisture Detection Sensor](https://arduinopakistan.com/product/lm393-3-3v-5v-soil-moisture-detection-sensor-soil-humidity-sensorsoil-hygrometer-for-arduino-automatic-watering-systemsrobots-and-smart-cars/): Function: A simple humidity sensor for detecting soil moisture. Output: High level output when soil is dry, low level otherwise. Application: Used to make automatic watering devices for easy plant garden management. Output Modes: Dual output mode with simple digital output and more accurate analog output. Features: Adjustable sensitivity (digital potentiometer adjusts digitally) and stable operation using LM393 comparator.
- [Pack of 2 - ENERGIZER MINIATURE ALKALINE E96 - AAAA Battery](https://arduinopakistan.com/product/pack-of-2-energizer-miniature-alkaline-e96-aaaa-battery/): Energizer AAAA Miniature Alkaline 1.5V Batteries, delivering long-lasting, reliable power to your gadgets Compatible with a variety of devices, including your camera, video game controllers, Bluetooth headsets, and glucose and blood monitors - compatible AAAA batteries for surface pen Cell size: AAAA/E96; Type: Miniature Alkaline; Volt: 1.5 Replacement for: E96, LR8D425, MN2500, MX2500 These zero-mercury Energizer Alkaline batteries responsibly power devices with less impact on the environment Powerful: Energizer Specialty Batteries are built to meet the requirements of today’s high-powered devices AAAA Cell
- [Camelion A27 for Remote Control, 12v A27 Cell](https://arduinopakistan.com/product/camelion-lr27a-a27-mn27-for-remote-control-12-v-12v-a27-size-cell-battery-alkaline-plus-cell/): High-performance battery with stable voltage level, and of superior alkaline technology. Is often used in remote controls, toys, radios, etc..
- [Laser sensor module - For Arduino KY-008](https://arduinopakistan.com/product/laser-sensor-module-high-sensitivity-laser-light-sensor-detection-module-for-arduino-ky-008/): Laser sensor module - High Sensitivity Laser Light Sensor Detection Module For Arduino KY-008 voltage 3.3-5v Compatible with Arduino Sensor Module KY-008 Laser sensor module Laser sensor module - High Sensitivity Laser Light Sensor Detection Module For Arduino KY-008
- [KY-009 3-color full-color LED SMD modules](https://arduinopakistan.com/product/ky-009-3-color-full-color-led-smd-modules/): KY-009 3-color full-color LED SMD modules ​voltage 3.3-5v 3.3-5v Compatible with Arduino Sensor Module KY-009 3-color full-color LED SMD modules 3-color full-color with Arduino KY-009 3-color full-color LED SMD modules
- [Infrared sensor receiver module - Arduino KY-022](https://arduinopakistan.com/product/infrared-sensor-receiver-module-high-sensitivity-infrared-ir-sensor-detection-module-for-arduino-ky-022/): High Sensitivity InfraRed IR Sensor Detection Module For Arduino KY-022 Voltage 3.3-5v Compatible with Arduino Sensor Module KY-022 Infrared sensor receiver module Infrared sensor receiver module - High Sensitivity InfraRed IR Sensor Detection Module For Arduino KY-022
- [KY-023 XY-axis joystick module - For Arduino](https://arduinopakistan.com/product/ky-023-xy-axis-joystick-module-high-sensitivity-2-dimensional-joystick-sensor-detection-module-for-arduino/): High-quality rocker, long life, stable performance. Two analog outputs, all the way to digital output. X, Y-axis output for the two potentiometers, you can read through the AD conversion twist angle. Like the next press the joystick, you can move all the way to touch the authority for the digital output, has been pulled. For two degrees of freedom servo PTZ control or other remote proportional control.
- [Energy Saver 800W Rod Quartz Heater - Fish Type Energy Saver (color may vary)](https://arduinopakistan.com/product/energy-saver-800w-rod-quartz-heater-fish-type-energy-saver-color-may-vary/): Quartz Heater 2 Rods 800W 400 each Rod Multiple Level Operations Drop Down Safety Feature Durable Stand Light Weight Easy to carry 220V direct supply ​ ​ ​ Energy Saver 800W Rod Quartz Heater - Fish Type Energy Saver (color may vary)
- [DHT11 Temperature Humidity Sensor Module](https://arduinopakistan.com/product/dht11-temperature-humidity-sensor-module-digital-temperature-humidity-sensor-3-3v-5v-with-wires-for-arduino-raspberry-pi/): DHT11: Specification Power supply voltage: 3.3~5.5V DC Output: the single bus digital signal Measuring range: 20-90%RH humidity, temperature 0~50° The measurement accuracy of ±5%RH: humidity, temperature ±2° Resolution: 1%RH humidity, temperature 1 ° Exchangeability: fully interchangeable Long term stability: <± 1%RH Interface Description: 1.VCC:External 3.3 V-5 V 2.GND:External GND 3.DO:Small board switch digital output interface, connect the microcontroller IO port
- [Transparent Case Acrylic Casing for 1 Channel of Timer Relay Module](https://arduinopakistan.com/product/transparent-case-acrylic-casing-for-1-channel-of-timer-relay-module/): Box contents: 1 x Relay Module 6 x Acrylic Case 4 x M3 x 12mm Copper Column 4 x M3 x 5 + 6mm Copper Column 8 x M3 x 6 Screw
- [USB Meter Tester Voltage Current](https://arduinopakistan.com/product/usb-meter-tester-voltage-current-tester-charger-doctor-usb-battery-checker-voltmeter-ammeter-multimeter-usb-tester-mobile-usb-power-tester-monitor-dc-led-display-usb-port-tester/): USB Tester Voltage Current Tester The USB checker can detects Voltage, Current, of the USB. Perfect phone charger tester of charging speed and quality. Measuring voltage: 3.0V-7.5V; measuring current: 0-2.5A. Upgraded Color Display Screen The current number is displayed in red and the voltage number is displayed in blue, large size letters which is clear and easy to read. High Quality The USB amp read tester uses a new generation of power four semi~ double loop integral converter IC , with a precision bandgap reference , range accuracy , high precision , stable and reliable performance , strong anti-interference ability. Wide Range of Application The USB voltage checker can measure USB powered or power consumption of the interface , mobile phone charger , U disk and other products. Easily measure the operating current of the output voltage of the USB port and equipment. Small and Portable Our USB tester is small size and no power, just plug to detect USB charger output voltage and current.
- [Wick for TURBO Kerosene Oil Heater - TOYOTOMI Model RCA-37A/KS-27A Wick](https://arduinopakistan.com/product/wick-for-turbo-kerosene-oil-heater-toyotomi-model-rca-37a-ks-27a-wick/): Movable kerosene heater Packing Fuel Consumption:0.24-0.28L/Hr Heater Output: 7800-8900BTU/Hr Continues Heating Duration:17-18hr Tank System:Triple Ignition Type: Match For Turbor Kerosene Heater. Model : RCA-37 Wick For Turbo Kerosene Heater|Turbo (Toyotomi) Wick | Replacement Wick for Toyotomi Turbo Kerosene Oil Heater. Turbo China wick. Cotton Imported Long Lasting Cotton/Fiberglass Construction Burn-Free Fiberglass Top Never Needs Trimming Super Absorbent Cotton Base for Consistent Fuel Flow
- [1x SONY HK 3 AAA Battery (R03-NCP 4A)](https://arduinopakistan.com/product/1x-sony-hk-3-aaa-battery-r03-ncp-4a/): Carbon Zinc Battery SONY HK AAA 1.5V CAUTION:NOT rechargeable. May explode or leak if recharged, disposed of in a fire or incorrectly installed. Keep away from small children. NO MERCURY ADDED Value for Money Variety use for example, Wall Watch, Remote Control etc.
- [Camelion Lithium Rechargeable Battery AA2 - 1.5V 2200mWh/1460mAh](https://arduinopakistan.com/product/camelion-lithium-rechargeable-battery-aa2-1-5v-2200mwh-1460mah/): High energy density for long-lasting power Low self-discharge rate, retaining charge when not in use Rechargeable up to 1000-2000 cycles, reducing waste and saving resources Compact and lightweight design for easy handling Safe and stable chemistry with built-in protection circuits Compatible with a range of devices, including flashlights, toys, and household items Important Safety Information: 1) When inserting batteries into your device, please take care to match the right polarities (+ and - ends) marked on the battery to the device; 2) Batteries which are incorrectly inserted into devices may be short-circuited. 3) Our lithium batteries use the highest quality cells of the safest technology and pass 14 safety test, our batteries are safety and reliability. 4) Provide always Fresh new Power. Embedded with innovative technology,solid output 1.5 voltage from 100% to 0% electric capacity, providing constant voltage and best performance even in very heavy load.
- [Button Top 18650 Rechargeable Battery 4200mAh 3.7 Volt](https://arduinopakistan.com/product/1x-button-top-18650-rechargeable-battery-4200mah-high-capacity-3-7-volt-rechargeable-battery-for-headlamp-flashlight-and-powerbank-color-may-vary-pack-of-1/): Batteries Size - 67*18*18mm/2.64*0.7*0.7inch; it's a Rechargeable Battery BUTTON TOP, please check carefully before purchasing !!!). Versatile Compatibility: Designed to be compatible with a wide range of devices, our 3.7V 18650 battery is perfect for flashlights, power banks, and other gadgets. Say goodbye to disposable batteries with our rechargeable 18650 battery, offering cost-saving and eco-friendly power solutions. High Capacity: Our 18650 rechargeable battery boasts a generous capacity, ensuring long-lasting power for your devices. Durability: Crafted with quality materials, our 18650 battery offers durability and resilience, providing a dependable power source for your electronic Enhanced Performance: With a stable 3.7V output, our 18650 battery delivers consistent and reliable performance, ideal for high-drain applications
- [RC522 RFID Sensor | Card | Key Tag](https://arduinopakistan.com/product/rc522-rf-ic-card-sensor-module-s50-blank-card-key-ring-for-arduino-raspberry-pi/): The MF522-AN module design the circuit of card read by using the original MFRC522 chip. Easy to use, low cost, and applicable to equipment development and card reader development etc. Applicable for the user who need to design or manufacture the RF card terminal. The module can be directly loaded into the various reader molds. The module use a voltage of 3.3V, it can connected communication with user's any CPU mainboard through several lines of SPI interface, it can ensure stable and reliable work, and reader distance.
- [Ultrasonic Sensor Mounting Bracket - Compatible with HC-SR04](https://arduinopakistan.com/product/ultrasonic-sensor-mounting-bracket-holder-for-hc-sr04-smart-car-arduino-color-may-vary-compatible-with-hc-sr04/): Product Name: Cartoon Ultrasonic Sensor Mounting Bracket. Material: Imported Acrylic. Thickness: 2.8-3.1mm/0.11-0.12Inch. Inner Diameter: 16mm/0.63Inch. Fixing Hole Diameter: 3.8mm/0.15Inh. Color: Vary Packing Quantity: Ultrasonic Sensor Mounting Holder. The distance sensor bracket can fix the ultrasonic sensor module. This support is only compatible with HC-SR04 ultrasonic ranging module, other ultrasonic modules cannot be compatible.
- [ESP8266 Node MCU](https://arduinopakistan.com/product/nodemcu-esp8266-serial-wireless-module-wifi-internet-of-things-development-board-compatible-with-arduino-ide-esp-8266/): A great set of tools to develop ESP8266.
- [Solenoid Lock - 12v DC](https://arduinopakistan.com/product/electromagnetic-solenoid-lock-mini-dc-12v-0-43a-door-drawer-tongue-down-slim-design-assembly-magnetic-lock-for-cabinet-door-drawer-tappered-shaft/): 【Usage】Applicable for being installed in the escape door or fire door electronic controlled system.Rustproof, durable, safety, convenient to use.
- [Mini Drill Machine for PCB](https://arduinopakistan.com/product/p-c-b-mini-drill-machine-electric-drill-set-mini-electric-rotary-drill-grinder-polish-sanding-tool-set-kit-multifunctional-with-adapter/)
- [Vero Board - Large](https://arduinopakistan.com/product/vero-board-large/)
- [Small Water Heating Rod - Immersion Water Rod 500W](https://arduinopakistan.com/product/small-water-heating-rod-immersion-water-rod-500w/)
- [40 Pins - Male to Female Jumper Cable](https://arduinopakistan.com/product/arduino-jumper-cable-male-to-female-30cm-40-pins/)
- [5mm RGB LED - Red Green Blue](https://arduinopakistan.com/product/5mm-rgb-tri-color-red-green-blue-multicolor-4pin-led-diodes-common-cathode-diffused-round-lens-29mm-long-lead-light-emitting-diodes/)
- [Cell AA Battery Charger - Black](https://arduinopakistan.com/product/cell-aa-battery-charger-black/): Specially designed slots prevent incorrect polarity insertion of the batteries.
- [3 Rod Quartz Heater - Energy Saver](https://arduinopakistan.com/product/3-rod-quartz-heater-energy-saver/)
- [Black - Jewelry Box - 25 Drawer](https://arduinopakistan.com/product/black-jewelry-box-25-drawer/)
- [HC-05 Wireless Bluetooth Module](https://arduinopakistan.com/product/hc-05-wireless-bluetooth-rf-transceiver-integrated-bluetooth-module-6-pin-wireless-serial-port-communication-bt-module-for-arduino/): Ethernet connection Support for 802.11Co-Existence.
- [Bluetooth 4.0 Audio Receiver Wireless Stereo Speaker Module](https://arduinopakistan.com/product/bluetooth-4-0-audio-receiver-wireless-stereo-speaker-module/)
- [Arduino Mega USB Cable](https://arduinopakistan.com/product/printer-port-usb-cable-for-arduino-mega-2560/)
- [Arduino UNO USB Cable](https://arduinopakistan.com/product/printer-port-usb-cable-for-arduino-uno-r3/)
- [6 Channel 5V Relay Module](https://arduinopakistan.com/product/6-channel-5v-relay-module/)
- [5mm Red LED Light Bulb](https://arduinopakistan.com/product/led-5mm-crystal-red/)
- [5mm White LED Light Bulb](https://arduinopakistan.com/product/led-5mm-crystal-white/)
- [LDR Light Dependent Resistor Light Sensor](https://arduinopakistan.com/product/ldr-light-dependent-resistor-light-sensor/)
- [Yellow Wheel for DC Motor](https://arduinopakistan.com/product/robot-wheel-for-diy-student-projects/)

## Optional

- [Agent (MCP protocol)](websites-agents.hostinger.com/arduinopakistan.com/mcp)

[comment]: # (Generated by Hostinger Tools Plugin)